Shop

Showing 1153–1176 of 1449 results

  • Specs Hanger Width: 125mm Baseplate Angle: 25°
  • Specs Hanger Width: 125mm Baseplate Angle: 50°
  •  
    • Diameter: 102mm Width: 56mm Contact Patch: 52mm Weight: 326g each
  • Comes in set of 2 Width: 149mm Height to Center of Axle: 55.75 mm Bushing Height: 0.6 inches, 92a Weight: 397g each Features:
    • Plug Barrel board side bushing
    • Faced Hangers
    • Hollow Axles
    • Hollow Kingpin
    • Extremely Straight Axles
    • Full Size 0.6″ Longboard Bushings
    • Pressure Casting (very strong)
    • Medium-Low Ride Height
    • Light Weight
  • Pantheon Fantail Cruiser

    Surfskate Decks
    £ 150.00
     
    SPECS Length: 33.75 inches Width: 9″ at the belly, 8.75″ at the front heel, 8″ over the back bolts Wheelbase: 19.2 inches Concave: Medium Radial, Shallow Microdrops Features: Wheel wells, flush mounts Construction: 6 ply maple, 2x triaxial fiberglass, epoxy laminat  
  •  

    BAMBOO Heavy

    The Bamboo heavy is stronger and stiffer than the medium flex. Riders up to about 240 lbs should be able to ride this deck flat with the 92mm Karma wheels and a 50 degree truck up front (rear would be 40 or 43 based on current options). Heavier riders may be able to get away with riding this deck by compensating with larger wheels and some risers to create more space between the ground and the low point on the board. This deck is not as stiff as our 8 ply maple / glass version. Consider it more like a 7 1/2 ply, if you are familiar with our maple versions of this deck. If you’re above 230 lbs, you may start to consider the 8 ply maple version of this deck, as it is a bit stiffer and will still be able to hold your weight without any fear of failure. OR if you just want a stiffer setup, the 8 ply is still available–until it’s not!
  •  

    BAMBOO Medium

    The Bamboo medium is the standard. Equate the amount of flex on this board to be similar to the maple 7 ply version of this deck. This is the board that will work the best for the most amount of riders. Anyone between 150 and 210 pounds should be able to ride this board, and riders at the top of this limit should only choose this board if they want a lot of flex. Please note that the more you weigh, the more force you will put on these boards, so if you’re near its upper limit, consider how you manage dropping off of curbs, for example. Riders toward the bottom of this limit may choose this board for a more snappy flex and a little less sag. You can create more space between the board and the ground by adding risers and larger wheels like our 102mm Hoku Wheels. I (Jeff, the owner/designer of Pantheon boards) am 190 pounds and I ride the medium flex. The board has a comfortable flex under my weight.
  • BAMBOO Light

    The Bamboo light flex is ideal for riders under 170 lbs. You CAN ride this up to 190 pounds, but you’re going to have an easier time bottoming it out. Heavier riders are going to stress this board more, so this is something to keep in mind when riding. If you’re a rider who really wants to ride a flexiible board, we recommend pairing the Bamboo light with risers and our large 102mm Hoku Wheels. That will get you off of the ground further and allow more space between the bottom of the board and the ground for the board to flex. The Bamboo light is not as flexible as the 6 ply maple + glass version of this deck. We wanted to tighten up the flex profiles so that they would be more usable for a greater number of riders. Consider the flex profile to be more akin to a 6 1/2 ply version of this deck, if you are familiar with the maple versions.
  • Hanger: 150mm | Baseplate: 50° Price for one truck. You need two trucks per board
  • MATERIALS & COMPONENTS

    DECK

    • 7 Ply Sustainable Canadian Maple
    • Wood material comes from sustainable sources of supply
    • Wood by-product is reclaimed for use in other products

    TRUCKS

    • Carver C7 / C2.4 6.5"

    WHEELS

    • Arbor Easyrider Series - Cannon
    • Sharp Lipped wheels for driving down the line
    • Intended for slashing urban barrels
    • Size: 65.0mm // Durometer: 78A
    • Contact Patch: 51.0mm // Offset: 3.5mm
    • Momentum Core: Dampens bumpy rides
    • Venice Formula: Soft and grippy

    OTHER COMPONENTS

    • ABEC 7 Bearings with Spacers
    • 3/16" Carver Padded Risers
    • Recycled Glass Re-Grit
     
  • MATERIALS & COMPONENTS

    DECK

    • 7 Ply Sustainable Canadian Maple
    • Wood material comes from sustainable sources of supply
    • Wood by-product is reclaimed for use in other products

    TRUCKS

    • Carver C7 / C2.4 6.5"

    WHEELS

    • Arbor Easyrider Series - Cannon
    • Sharp Lipped wheels for driving down the line
    • Intended for slashing urban barrels
    • Size: 65.0mm // Durometer: 78A
    • Contact Patch: 51.0mm // Offset: 3.5mm
    • Momentum Core: Dampens bumpy rides
    • Venice Formula: Soft and grippy

    OTHER COMPONENTS

    • ABEC 7 Bearings with Spacers
    • 3/16" Carver Padded Risers
    • Recycled Glass Re-Grit
  • MATERIALS & COMPONENTS

    DECK

    • 7 Ply Sustainable Canadian Maple
    • Wood material comes from sustainable sources of supply
    • Wood by-product is reclaimed for use in other products

    TRUCKS

    • Carver CX / C2.4 6.5"

    WHEELS

    • Arbor Easyrider Series - Cannon
    • Sharp Lipped wheels for driving down the line
    • Intended for slashing urban barrels
    • Size: 65.0mm // Durometer: 78A
    • Contact Patch: 51.0mm // Offset: 3.5mm
    • Momentum Core: Dampens bumpy rides
    • Venice Formula: Soft and grippy

    OTHER COMPONENTS

    • ABEC 7 Bearings with Spacers
    • 3/16" Carver Padded Risers
    • Griptape
  • MATERIALS & COMPONENTS

    DECK

    • 7 Ply Sustainable Canadian Maple
    • Wood material comes from sustainable sources of supply
    • Wood by-product is reclaimed for use in other products

    TRUCKS

    • Carver CX / C2.4 6.5"

    WHEELS

    • Arbor Easyrider Series - Cannon
    • Sharp Lipped wheels for driving down the line
    • Intended for slashing urban barrels
    • Size: 65.0mm // Durometer: 78A
    • Contact Patch: 51.0mm // Offset: 3.5mm
    • Momentum Core: Dampens bumpy rides
    • Venice Formula: Soft and grippy

    OTHER COMPONENTS

    • ABEC 7 Bearings with Spacers
    • 3/16" Carver Padded Risers
    • Griptape
  • MATERIALS & COMPONENTS

    DECK

    • 7 Ply Sustainable Canadian Maple
    • Wood material comes from sustainable sources of supply
    • Wood by-product is reclaimed for use in other products

    TRUCKS

    • Carver CX / C2.4 6.5"

    WHEELS

    • Arbor Easyrider Series - Cannon
    • Sharp Lipped wheels for driving down the line
    • Intended for slashing urban barrels
    • Size: 65.0mm // Durometer: 78A
    • Contact Patch: 51.0mm // Offset: 3.5mm
    • Momentum Core: Dampens bumpy rides
    • Venice Formula: Soft and grippy

    OTHER COMPONENTS

    • ABEC 7 Bearings with Spacers
    • 3/16" Carver Padded Risers
    • Griptape
  • Features:
    • One (1) set of 75mm ABEC 11 ZigZags Longboard Skateboard Wheels; includes four (4) wheels
    • Diameter: 75mm
    • Durometer: 80a
    • Color: Green
     
  •  
    The latest Pantheon Pranayama is reworked for longevity, flex and reliability. The board now has a 6-ply Canadian maple core, encasing either side in triaxial fiberglass. On top of that is a beautiful walnut veneer. Specs Length: 79.7 cm / 31.375" Width: 23.5 cm / 9.25" Wheelbase: 66 cm / 23.5" Construction: Fiber glass / Maple Gripped: Yes Drop: 1.3 inch crescent Profile: Slight Mustache Camber/Rocker Set-up: Trucks:  Paris Street Wheels: Karma Wheels Bearings: Zealous
  •  
    • Pantheon Nexus Deck
    • Paris v3 165mm 50° Trucks
    • Pantheon 92mm Karma Wheels
    • Zealous Bearings
  •   Specs Set-up: Trucks: 165mm Paris V3 50° ( Raw Or Matt Black ) Wheels: Pantheon Karma Wheels Bearings: Zealous
    • 85a (Blue): 140 pounds (64kg) or less
    • 87.5a (Pink): 140 – 175 pounds (64kg – 79kg)
    • 90a (Yellow): 175 – 205 pounds (79kg – 93kg)
    • 92.5a (Dark Blue): 185 – 235 pounds (84kg – 107kg)
    • 95a (Red): 235 pounds (107kg) or more
    Set of 2 Bushings