Features:
- Internal Diameter: 8mm
- External Diameter: 12mm
- Depth: 10mm
- 100% Aluminium
Showing 1–72 of 1449 results
-
Features:
-
Zealous Bearings - 8mm Skateboard BearingsContents:
- Precision 8mm axle holes
- 409" built in spacers
- 1mm built in speedrings
- Green rubber seals to keep dirt and debris on the outside of the bearing.
- Lubed with Archoil Nanoceramic Grease
-
Venom Downhill Bushings
Pastel Pink 73a (Even softer!)Blue 78a (Softest)
Orange 81a (Softer)
Yellow 85a (Soft)
Purple 87a (Medium Soft)
Red 90a (Medium)
Green 93a (Hard)Glow in the Dark 95a (Medium Hard)
Pink 97a (Hardest) Each quantity of 1 purchased is a single bushing.
You have 2 trucks per skateboard, & each truck takes 2 bushings.
So for a complete skateboard, you need to buy a quantity of 4. -
Venom Super Carve Bushings
Blue 78a (Softest)
Orange 81a (Softer)
Yellow 85a (Soft)
Purple 87a (Medium Soft)
Red 90a (Medium)
Green 93a (Hard)Glow in the Dark 95a (Medium Hard)
Pink 97a (Hardest) Each quantity of 1 purchased is a single bushing.
You have 2 trucks per skateboard, & each truck takes 2 bushings.
So for a complete skateboard, you need to buy a quantity of 4. -
Features:
- one (1) Newton's Shred Cupped Washers
- You will need to order four Cupped Washers if you are replacing the washers on both trucks.
- Perfect fit for Barrel Bushing
-
Venom Tall Downhill Bushings
Pastel Pink 73a (Even softer!)Blue 78a (Softest)
Orange 81a (Softer)
Yellow 85a (Soft)
Purple 87a (Medium Soft)
Red 90a (Medium)
Green 93a (Hard)Glow in the Dark 95a (Medium Hard)
Pink 97a (Hardest) Each quantity of 1 purchased is a single bushing.
You have 2 trucks per skateboard, & each truck takes 2 bushings.
So for a complete skateboard, you need to buy a quantity of 4. -
Duro's: 60A, 62.5A, 65A, 67.5A, 70A, 75A, 80A, 85A, 87.5, 90A, 92.5A, 95A, 97.5A Each quantity of 1 purchased is a single bushing. You have 2 trucks per skateboard, & each truck takes 2 bushings. So for a complete skateboard, you need to buy a quantity of 4. -
Set of 2 Bushings -
Set of 2 Bushings -
Features:
- Two (2) Eos Cork Longboard Skateboard Riser
- 1/8"
- Provides additional clearance and helps prevent wheel bite
- Water resistance
- Sold in sets of two
-
Venom HPF Caliber Plug Barrel Bushings
Yellow 85a (Soft)
Purple 87a (Medium Soft)
Red 90a (Medium)
Green 93a (Hard)Glow in the Dark 95a (Medium Hard)1 set = 2 bushings -
Features:
- Four (4) Newton's Shred Speed Rings 8mm
-
Features:
- Two (2) RipTide Sports WFB Skateboard Truck Pivot Cups from RipTide Sports
- Hardness: 96a
- Color: Lime
- Specifically designed for Carver CX.4 / C2.4 trucks
- Hand-poured into Custom-made molds, then the cup end is machined to fit the truck's base plate perfectly
- No machining imperfections and no heat-affected zone in the super smooth pivot contact area
- Made from high-quality materials and built to last
- Sold as Pair with Sticker
-
- 85a (Blue): 140 pounds (64kg) or less
- 87.5a (Pink): 140 – 175 pounds (64kg – 79kg)
- 90a (Yellow): 175 – 205 pounds (79kg – 93kg)
- 92.5a (Dark Blue): 185 – 235 pounds (84kg – 107kg)
- 95a (Red): 235 pounds (107kg) or more
-
WFB™ (World's Fastest Bushings) compound
Internally lubricated for smooth, fast, low-friction transitions in any competitive discipline.
Duro's:
- 68A Purple
- 73A Green
- 78A Orange
- 83A Blue
- 88A Yellow
- 93A Red
- 95.5A Green
-
Venom Downhill Bushings
Blue 78a (Softest)
Orange 81a (Softer)
Yellow 85a (Soft)
Purple 87a (Medium Soft)
Red 90a (Medium)
Green 93a (Hard) Pink 97a (Hardest) Each quantity of 1 purchased is a single bushing.
You have 2 trucks per skateboard, & each truck takes 2 bushings.
So for a complete skateboard, you need to buy a quantity of 4. -
Features:
- one (1) Newton's Shred Axle Nuts
- You will need to order four axle nuts if you are replacing the nuts on both trucks.
-
Features:
- one (1) Newton's Shred Cone Washers
- You will need to order four Cone Washers if you are replacing the washers on both trucks.
- Perfect fit for Cone Bushing
-
Features:
- Two (2) Eos Flat Washers
-
Set of 2 Bushings -
Zealous Ceramic Bearings - 8mm Skateboard Bearings:
- Precision 8mm axle holes
- 4045″ built in spacers
- 5mm built in speedrings
- Strengthened Nylon Ball Retainers
- White rubber seals to keep dirt and debris on the outside of the bearing
- Lubed with Custom Nanoceramic Grease
-
Out of stockOut of stock
Features:
- One (1) Piece Black Premium Vicious Grip Tape 1 Piece (10" x 11") Griptape from Vicious
- Sheet Size: 10" x 11"
- Formulated with long-lasting glue to provide the best grip
- Perfect, fine-grit texture and smooth cutting
- Great for skateboards, cruisers, longboards, and more
-
Features:
- one (1) Newton's Shred Kingpin nut
- You will need to order four axle nuts if you are replacing the nuts on both trucks.
-
Set of 2 Bushings -
Set of 2 Bushings -
Venom Super Carve Bushings
Blue 78a (Softest)
Orange 81a (Softer)
Yellow 85a (Soft)
Purple 87a (Medium Soft)
Red 90a (Medium)
Green 93a (Hard)Glow in the Dark 95a (Medium Hard)
Pink 97a (Hardest) Each quantity of 1 purchased is a single bushing.
You have 2 trucks per skateboard, & each truck takes 2 bushings.
So for a complete skateboard, you need to buy a quantity of 4. -
Set of 2 Bushings -
Features:
- Two (2) Eos Precision Flat Washers
-
Features:
- One (1) set Newton's Shred Bolts Phillips 1.25" mounting hardware
- Set includes: eight (8) Black bolts and eight (8) matching lock nuts
- Mounts skateboard trucks to the deck
- Durable hardware that can withstand the toughest abuse
-
Venom Downhill Bushings
Blue 78a (Softest)
Orange 81a (Softer)
Yellow 85a (Soft)
Purple 87a (Medium Soft)
Red 90a (Medium)
Green 93a (Hard)Glow in the Dark 95a (Medium Hard)
Pink 97a (Hardest) Each quantity of 1 purchased is a single bushing.
You have 2 trucks per skateboard, & each truck takes 2 bushings.
So for a complete skateboard, you need to buy a quantity of 4. -
Product details
- 4mm thick
- Sold as a pair
- 330mm x 125mm
-
Precision-Machined • Ultra-Low Profile • Easy to Stack!Package of one (1) 3-degree Riser and one (1) 7-degree Riser. -
Features:
- One (1) set Newton's Shred Bolts Phillips 1.5" mounting hardware
- Set includes: eight (8) Black bolts and eight (8) matching lock nuts
- Mounts skateboard trucks to the deck
- Durable hardware that can withstand the toughest abuse
-
Features:
- Two (2) Eos Cup Washers
-
Features:
- Two (2) RipTide Sports WFB Skateboard Truck Pivot Cups from RipTide Sports
- Hardness: 96a
- Color: Lime
- Specifically designed for Paris V3 Trucks
- Hand-poured into Custom-made molds, then the cup end is machined to fit the truck's base plate perfectly
- No machining imperfections and no heat-affected zone in the super smooth pivot contact area
- Made from high-quality materials and built to last
- Sold as Pair with Sticker
-
Specs
Diameter: 86mm
Durometer: 76A
Width:55mm
Contact patch:50mm
Core Position:Offset
Lip:Round
Surface:Smooth -
Venom HPF Caliber Plug Barrel+Cone Bushings
Yellow 85a (Soft)
Purple 87a (Medium Soft)
Red 90a (Medium)
Green 93a (Hard)Glow in the Dark 95a (Medium Hard)1 set = 2 bushings -
Don't you hate it when your tail is wearing out while your board has so much life in it still? Seismic has a solution and they're called skid-plates. Mount these on your nose and tail an Lengthen the lifespan of your board! Available in three different shapes and colors, so that they will fit your board perfectly. -
Features:
- Two (2) Eos Slide Pucks
- Size: 90 x 24mm
-
Venom SHR Super Carve Bushings
Olive Green 80a
Pastel Yellow 83a
Pastel Blue 86a
Seafoam Green 88a
Red 91a
White 94a
Grey 98a Each quantity of 1 purchased is a single bushing.
You have 2 trucks per skateboard, & each truck takes 2 bushings.
So for a complete skateboard, you need to buy a quantity of 4. -
Out of stockOut of stock
Bones Speed Cream -
Features:- 1 : 1 with an experienced Surfskate rider
- 60 min session in London or Essex
- Smoothstar or Carver Safety equipment available
- All level surfer
-
Features:
- Two (2) RipTide Sports WFB Skateboard Truck Pivot Cups from RipTide Sports
- Hardness: 96a
- Color: Lime
- Specifically designed for Independent, Bennett truck
- Hand-poured into Custom-made molds, then the cup end is machined to fit the truck's base plate perfectly
- No machining imperfections and no heat-affected zone in the super smooth pivot contact area
- Made from high-quality materials and built to last
- Sold as Pair with Sticker
-
Features:
- Size: Small / Medium (54cm-57cm), Large / X-Large (58cm-62cm)
- Color: Various Colours
- Shell : High Density ABS Injection Moulded
- Liner : EPS Polystyrene / Foam
- Ventilation : 12 Vent cooling system
- Inner Padding: 3 piece removable and washable
- Safety Certificate : CE EN 1078
-
Out of stockOut of stock
Features:
-
- Excellent adhesion to: leather, canvas, suede, rubber, fabric & many other substrates!
- Solvent-free
- Less than 3% VOCs
- Dries crystal clear
- UV resistant
- Extreme flexibility
- Permanent bond
- Excellent water resistance
- Abrasion resistant
-
-
Features:
- One (1) set Newton's Shred Phillips Panhead 1.25" mounting hardware
- Set includes: eight (8) Black bolts and eight (8) matching lock nuts
- Mounts skateboard trucks to the deck
- Durable hardware that can withstand the toughest abuse
-
Features:
- Two (2) RipTide Sports WFB Skateboard Truck Pivot Cups from RipTide Sports
- Hardness: 96a
- Color: Lime
- Specifically designed for Yow Meraki
- Hand-poured into Custom-made molds, then the cup end is machined to fit the truck's base plate perfectly
- No machining imperfections and no heat-affected zone in the super smooth pivot contact area
- Made from high-quality materials and built to last
- Sold as Pair with Sticker
-
Bones Bearings - 8mm Bones Reds Precision Skate Rated Skateboard Bearings Contents:
- Set of 8 bearings
- Instructions
- Sticker
-
Bones Bearings - 8mm Big Balls Reds Bearings Skateboard Bearings Contents:
- Set of 8 bearings
- Instructions
- Sticker
-
Out of stockOut of stock
Package contains:
- 1 RipTide Replacement Bushing for Waterborne Surf Adapter
- RipTide Sticker
-
Features:
- One (1) set Newton's Shred Bolts Phillips 2" mounting hardware
- Set includes: eight (8) Black bolts and eight (8) matching lock nuts
- Mounts skateboard trucks to the deck
- Durable hardware that can withstand the toughest abuse
-
Features:
- Two (2) Venom Skateboard Riser
- Height: 1/8"
- Provides additional clearance and helps prevent wheel bite
- Sold in sets of two
-
Features:
- Size: X-Small / Small (51cm-56cm), Medium / Large (53cm-58cm) & X-Large (58cm-61cm)
- Color: Various Colours
- EPS foam impact liner for maximum impact dissipation
- 12 vents for maximum ventilation
- Comes with a fit kit for maximum comfort
- Dual certified to both CPSC bicycle standards and CE-1078 bicycle and skateboard standards
-
A revolutionary new downhill griptape by the Rocket scientists. -
Package contains:
- 2 Cone Bushings .975" Diameter x .4" High
- 2 Barrel Bushings .975" Diameter x .5" High
- 4 cup washers
- RipTide Sticker
-
Features:
- One (1) set Rogers Bros 1.25" mounting hardware
- Mounts skateboard trucks to the deck
- Durable hardware that can withstand the toughest abuse
-
Set of 2 Bushings -
Features:
- Rebuild your worn-out soles overnight.
- Seal rubber boots, galoshes, and waders.
- Coat and protect shoes to avoid premature wear.
- Repair damaged heels.
- Secure loose insoles.
- Reinforce skate shoes.
- Coat skateboards for extra traction.
- Color: Transparent
- Volume: 109.4 ml
-
- Diameter: 92mm
- Width: 53mm
- Contact Patch: 49mm
- Weight: 278g each
-
Package contains:
- 2 Cone Bushings .975" Diameter x .4" High
- 2 Barrel Bushings .975" Diameter x .5" High
- 4 cup washers
- RipTide Sticker
-
The latest Pantheon Pranayama is reworked for longevity, flex and reliability. The board now has a 6-ply Canadian maple core, encasing either side in triaxial fiberglass. On top of that is a beautiful walnut veneer. Specs: Length: 31.375" / 79.7cm Width: 9.25" / 23.5cm Wheelbase: 26" / 66cm Construction: Fiber glass / Maple -
Features:- One (1) sheet of Blue Premium Seismic Skate Systems Lokton Squares Griptape from Seismic
- Sheet Size: 1 piece of 11" x 11"
- Formulated with long-lasting glue to provide the best grip
- Perfect, fine-grit texture and smooth cutting
- Great for skateboards, cruisers, longboards, and more
-
Features:
- One (1) Orangatang Knuckles Bushing Set From Orangatang
- Hardness: Soft
- Color: Orange
- Keep skateboard trucks flexible and adaptable
- Made from high-quality materials and built to last
-
Features:- One (1) Loaded Button Head Black Skateboard Hardware Set - 1" mounting hardware
- Set includes: eight (8) Black bolts and eight (8) matching lock nuts
- Mounts skateboard trucks to the deck
- Durable hardware that can withstand the toughest abuse
-
Venom Downhill Bushings
Olive Green 80a
Pastel Yellow 83a
Pastel Blue 86a
Seafoam Green 88a
Red 91a
White 94a
Grey 98a Each quantity of 1 purchased is a single bushing.
You have 2 trucks per skateboard, & each truck takes 2 bushings.
So for a complete skateboard, you need to buy a quantity of 4. -
TECH SPECS
Weight
3.3 kgDeck
32.5” Matt BlackDeck Tail Width
24.3cmBearings
ABEC 7Trucks
Black Powder Coat AluminimThruster Type
Black Thruster D -
Available in: 108mm, 129mm, 149 and 169mm NOTE: Sold only as a set of two (2) trucks. -
WFB™ (World's Fastest Bushings) compound
Internally lubricated for smooth, fast, low-friction transitions in any competitive discipline.
Duro's:
- 68A Purple
- 73A Green
- 78A Orange
- 83A Blue
- 88A Yellow
- 93A Red
- 95.5A Green
-
Don't you hate it when your tail is wearing out while your board has so much life in it still? Seismic has a solution and they're called skid-plates. Mount these on your nose and tail an Lengthen the lifespan of your board! Available in three different shapes and colors, so that they will fit your board perfectly. -
Features:
- One (1) set Rogers Bros 1.5" mounting hardware
- Mounts skateboard trucks to the deck
- Durable hardware that can withstand the toughest abuse
