Specs
Length: 78.7cm / 31"
Width: 23.9cm / 9.4"
Setup
Trucks: Carver CX/C2, Bushings: Knuckles Soft/Orange (Front) + Medium/Purple (Rear)
Wheels: 70mm 4President 77a Blue Showing all 114 results
-
Specs
Length: 78.7cm / 31"
Width: 23.9cm / 9.4"
Setup
Trucks: Carver CX/C2, Bushings: Knuckles Soft/Orange (Front) + Medium/Purple (Rear)
Wheels: 70mm 4President 77a Blue -
Features:
- One (1) set of 62mm Bennet Alligator Longboard Skateboard Wheels; includes four (4) wheels
- Diameter: 62mm
- Durometer: 78a
- Color: Green Translucent
-
This hybrid surfskate Truck is ideal for skaters that are used to normal Trucks, and the C7s are a little bit too turny for them. With a different geometry based on TKP Trucks, these are ideal for everyone who is looking to get every bit of pump out of their Trucks. Suited for size decks: 7.8"-8.5" Hanger: 6.5" / Quantity: Set
-
DECK
- 7 Ply Sustainable Canadian Maple
- Wood material comes from sustainable sources of supply
- Wood by-product is reclaimed for use in other products
TRUCKS
- Carver C7 / C2.4 6.5"
WHEELS
- Arbor Easyrider Series - Cannon
- Sharp Lipped wheels for driving down the line
- Intended for slashing urban barrels
- Size: 65.0mm // Durometer: 78A
- Contact Patch: 51.0mm // Offset: 3.5mm
- Momentum Core: Dampens bumpy rides
- Venice Formula: Soft and grippy
OTHER COMPONENTS
- ABEC 7 Bearings with Spacers
- 3/16" Carver Padded Risers (Double)
- Recycled Glass Re-Grit
-
Deck specs:
Width: 9 7/8"
Tail: 6 1/2"
Nose: 4 1/8"
Wheelbase: 18 7/8"
Set up:
Front Truck: 6.5" C7
Back Truck: 6.5" C2
Griptape Styl: Single Stringer
Stock Wheels: 70mm/78A Smoke Mags -
comes with: . 1x 5.75" CX.5 front truck . 1x 5.75" C4 back truck . 8x mounting hardware -
Sold as a pack of 2 rails with screws-ready to apply to your deck.
-
Deck specs:
Width: 9 7/8"
Tail: 6 1/2"
Nose: 4 1/8"
Wheelbase: 18 7/8"
Set up:
Front Truck: 6.5" CX
Back Truck: 6.5" C2
Griptape Styl: Single Stringer
Stock Wheels: 70mm/78A Smoke Mags -
Out of stockOut of stock
Dimensions
- Length - 29”
- Width: 7.5”
- Wheelbase: 15 1/2”'
-
Out of stockOut of stock
Dimensions
- Length: 80.6 cm / 31.75”
- Width: 22.2 cm / 8.75”
- Construction: 7-Ply Hard Rock Maple.
- Gripped: No.
-
Features:
- One (1) set of two (2) Bennett Vector 6.0 Trucks 152mm Skateboard Reverse Kingpin Trucks
- Axle width: 6"
- Hanger width: 152mm
- Constructed from high-quality materials
-
C7 Trucks This is the signature truck that started it all. Still the smoothest turning, fastest pumping surf truck ever, it's at the leading edge of true surfskate performance. The patented second axis of this front truck not only increases the turning radius of your carve, but lets you snap the nose and pivot your turns off the tail. This dynamic creates thrust and drives you forward with increasing speed. The striking similarity to surfing performance has made the C7 the choice for surf training by Pros and Ams alike. -
Sold as a pack of 2 rails with screws-ready to apply to your deck.
-
Specs
Length: 71.1 cm / 28”
Width: 24.3 cm / 9.56”
Wheelbase: 50.8 cm - 55.9 cm / 20” - 22”.
Construction: Ultralight wood core, Carbon fiber, Glass fiber, Urethane edges, Embossed ABS topsheets.
Gripped: No. -
Dimensions
Length: 97.5 cm / 38.4"
Width: 24.6 cm / 9.7"
Wheelbase: 74.5 / 29.3"
Main Use: Long Distance Pumping / Pushing
Mounting of trucks: Dropthrough
Kicks: No
Drop in deck: Medium drop
Flex: Flex or stiff,
Flex1: <110kg / 240lbs
Flex2: <90kg / 200lbs
Concave: 0.55” / 12 mm
Wedge: +9° front, -13° back
Weight: 1500 g / 3.3 lbs (flex) and 1700 g / 3.7 lbs (stiff)
- SFI certified bamboo (hollow core), SFI certified canadian maple, Carbon fiber, Glass fiber, Embossed ABS top-sheet
-
Out of stockOut of stock
Dimensions
- Width: 10.5"
- Length: 31"
- Made in USA
-
Out of stockOut of stock
The Rocket Micro is the smaller of the two Ian Freire Pro models, this 30.5" is lightweight and a true Downhill machine. -
Out of stockOut of stock
Dimensions- Length – 30″
- Width: 9”
- Wheelbase: 22” | 21" | 16"
-
Out of stockOut of stock
Features:
- One (1) set of 62mm Bennet Alligator Longboard Skateboard Wheels; includes four (4) wheels
- Diameter: 62mm
- Durometer: 80a
- Color: Blue
-
Features:
- One (1) set of two (2) Bennett Vector 4.3 Trucks 110mm Skateboard Reverse Kingpin Trucks
- Axle width: 4.3"
- Hanger width: 110mm
- Constructed from high-quality materials
-
MATERIALS & COMPONENTS
DECK
- 7 Ply Sustainable Canadian Maple
- Wood material comes from sustainable sources of supply
- Wood by-product is reclaimed for use in other products
TRUCKS
- Carver CX / C2.4 6.5"
WHEELS
- Arbor Easyrider Series - Cannon
- Sharp Lipped wheels for driving down the line
- Intended for slashing urban barrels
- Size: 65.0mm // Durometer: 78A
- Contact Patch: 51.0mm // Offset: 3.5mm
- Momentum Core: Dampens bumpy rides
- Venice Formula: Soft and grippy
OTHER COMPONENTS
- ABEC 7 Bearings with Spacers
- 3/16" Carver Padded Risers
- Griptape
-
MATERIALS & COMPONENTS
DECK
- 7 Ply Sustainable Canadian Maple
- Wood material comes from sustainable sources of supply
- Wood by-product is reclaimed for use in other products
TRUCKS
- Carver C7 / C2.4 6.5"
WHEELS
- Arbor Easyrider Series - Cannon
- Sharp Lipped wheels for driving down the line
- Intended for slashing urban barrels
- Size: 65.0mm // Durometer: 78A
- Contact Patch: 51.0mm // Offset: 3.5mm
- Momentum Core: Dampens bumpy rides
- Venice Formula: Soft and grippy
OTHER COMPONENTS
- ABEC 7 Bearings with Spacers
- 3/16" Carver Padded Risers
- Recycled Glass Re-Grit
-
If you love going down the hills head first. You will love this deck. Just like a rhino you will not stop before anything in your path. This deck is agile and speed stiff. Length 32” / 81.5 cm Material SFI-certified Canadian maple, Carbon fiber, Embossed ABS topsheet Width 8.85’’ / 22.5 cm Wheelbase 20.5’’ – 23.5’’ / 52 – 59.5 cm Concave 0.4’’ / 10 mm -
Sold as a pack of 2 rails with screws-ready to apply to your deck.
-
Sold as a pack of 2 rails with screws-ready to apply to your deck.
-
Sold as a pack of 2 rails with screws-ready to apply to your deck.
-
Sold as a pack of 2 rails with screws-ready to apply to your deck.
-
TLength: 36” / 91.5 cm
Width: 9.45” / 24 cm
Wheelbase: 22.8” – 25” / 58 – 63.5 cm
Concave: 0.43” – 0.6″ / 11 – 15 mm
Material: SFI-certified bamboo, Carbon fiber, Natural flax fiber, Glass fiber, Embossed ABS topsheet
Weight: 3.9 lbs / 1.8 kg -
Specs
Length: 78.7cm / 31"
Width: 23.9cm / 9.4"
Setup
Trucks: Carver C7/C2, Bushings: nuckles Medium/Purple (Rear)
Wheels: 70mm 4President 80a Orange -
Dimensions
- Length: 39”
- Width: 9.7”
- WHEELBASE: 25” / 27"
- CONCAVE: 0.47”
-
Specs
Length: 71.1 cm / 28”
Width: 24.3 cm / 9.56”
Wheelbase: 50.8 cm - 55.9 cm / 20” - 22”.
Construction: Ultralight wood core, Carbon fiber, Glass fiber, Urethane edges, Embossed ABS topsheets.
Gripped: No.
-
Dimensions
- Length: 38.4” / 97.5 cm
- Width: 9.7” / 24.6 cm
- WHEELBASE: 29.3” / 74.5 cm
- CONCAVE: 0.55” / 12 mm
- WEDGE: 9° front, -13° back
- WEIGHT1500 g / 3.3 lbs (flex)1700 g / 3.7 lbs (stiff)MATERIAL SFI certified bamboo (hollow core), SFI certified canadian maple, Carbon fiber, Glass fiber, Embossed ABS top-sheet
-
Out of stockOut of stock
Relive the glory days of skateboarding with the Vision MG Old School Skateboard Deck! Comes with a classic old school shape and has a Width of 10” and a Length of 30”.
Specs
Length: 76.2 cm / 30”
Width: 25.4 cm / 10”
NOTE: grip tape not included and must be ordered separately.
-
Out of stockOut of stock
Heroin Tom Day Woodsman (Assorted Stains) Skateboard Deck Features:
- Woodsman Deck
- 8.75'' x 32''
- 14.5'' WB
- 7-Ply Canadian Maple
- Tom Day Pro Model
- Razor Edge
- Colour - Assorted Stains
- This Deck comes with FREE grip. We will only install grip if you tell us. Send us a message via PM at check out.
-
Out of stockOut of stock
Heroin Mister Kinoshita Deck Skateboard Deck Features:
- Mister Kinoshita Deck
- 8.38'' x 32''
- 14.5'' WB
- 7-Ply Canadian Maple
- This Deck comes with FREE grip. We will only install grip if you tell us. Send us a message via PM at check out.
-
Out of stockOut of stock
Heroin Dmodw Giallo Skateboard Deck Features:
- 9" wide / 32.5 length / 14.38" wheelbase
- Part of the GIALLO Series by Charles Forsman
- Razor Edge Construction
- Deerman of Dark Woods Pro Model
- Pressed in Mexico
- 7-Ply Canadian Maple construction
- This Deck comes with FREE grip. We will only install grip if you tell us. Send us a message via PM at check out.
-
Out of stockOut of stock
Heroin Craig Behemoth Skateboard Deck Features:
- Behemoth Deck
- 9.6'' x 31.9''
- 14.6'' WB
- 7-Ply Canadian Maple
- Craig Questions Pro Model
-
Out of stockOut of stock
- Heroin Dead Dave Mutant Egg Skateboard Deck Features:
- Mutant Egg Deck
- 9.6'' x 31.625''
- 14.4'' WB
- 7-Ply Canadian Maple
- Dead Dave Pro Model
- This Deck comes with FREE grip. We will only install grip if you tell us. Send us a message via PM at check out.
-
Out of stockOut of stock
- Symmetrical Egg Deck
- 9.0 Inches Wide Shaped Deck
- Razor Edge Construction
- This Deck comes with FREE grip. We will only install grip if you tell us. Send us a message via PM at check out.
-
Out of stockOut of stock
Death Radden Skull Girls Skateboard Deck Features:
- Skull Girls Deck
- 8.5''
- 14.5'' WB
- 7-Ply Canadian Maple
- Mark Radden Pro Model Deck
-
Death Radden Skull Girls Skateboard Deck Features:
- Skull Girls Deck
- 8.25''
- 14.5'' WB
- 7-Ply Canadian Maple
- Mark Radden Pro Model Deck
-
Dimensions
- Length - 29
- Width: 7.5”
-
Dimensions
- Length: 91 cm / 35.82"
- Width: 25 cm / 9.84”
- Wheelbase: 56 / 64 cm / 22 / 25.2”
- Construction: SFI-certified Canadian maple, Carbon fiber, Embossed ABS topsheet
- Griptape Included: No.
-
Dimensions
- Length - 28"
- Width: 8''
- Wheelbase: 13 3/4" '
-
Features:
- One (1) Newton's Shred Goku Men's Short Sleeve T-Shirt
- Size: Extra Large
- Color: Black
- 100% Guaranteed Authentic
-
Dimensions
- Width: 10.5"
- Length: 31"
- Made in USA
-
Dimensions
- Width: 10"
- Length: 30.25"
- Construction: 7-ply Hard Rock Maple.
- Made in USA
-
Out of stockOut of stock
Features:
- One (1) set of 62mm Bennet Alligator Longboard Skateboard Wheels; includes four (4) wheels
- Diameter: 62mm
- Durometer: 79a
- Color: Orange
-
Out of stockOut of stock
Features:
- One (1) set of two (2) Bennett Vector 6.0 Trucks 152mm Skateboard Reverse Kingpin Trucks
- Axle width: 6"
- Hanger width: 152mm
- Constructed from high-quality materials
-
Comes with:
- Die-cut Grip Tape
- FibreFlex Stickers on the deck and bottom
- Length: 30"
- Width: 7.5"
- Wheelbase: 16.5"
-
Specs
Length: 76.2 cm / 30”
Width: 24.1 cm / 9.5”
Wheelbase: 40.6 cm / 16”.
Construction: Maple.
Gripped: No. -
Specs
Length: 76.2 cm / 30”
Width: 24.6 cm / 9.7”
Construction: Maple
Griptape Included: No.
No concave -
Comes with:
- Die-cut Grip Tape
- FibreFlex Stickers on the deck and bottom
- Length: 30"
- Width: 7.5"
- Wheelbase: 16.5"
-
Comes with:
- Die-cut Grip Tape
- FibreFlex Stickers on the deck and bottom
- Length: 30"
- Width: 7.5"
- Wheelbase: 16.5"
-
Comes with:
- Die-cut Grip Tape
- FibreFlex Stickers on the deck and bottom
- Length: 30"
- Width: 7.5"
- Wheelbase: 16.5"
-
MATERIALS & COMPONENTS
DECK
- 7 Ply Sustainable Canadian Maple
- Wood material comes from sustainable sources of supply
- Wood by-product is reclaimed for use in other products
TRUCKS
- Carver CX / C2.4 6.5"
WHEELS
- Arbor Easyrider Series - Cannon
- Sharp Lipped wheels for driving down the line
- Intended for slashing urban barrels
- Size: 65.0mm // Durometer: 78A
- Contact Patch: 51.0mm // Offset: 3.5mm
- Momentum Core: Dampens bumpy rides
- Venice Formula: Soft and grippy
OTHER COMPONENTS
- ABEC 7 Bearings with Spacers
- 3/16" Carver Padded Risers
- Griptape
-
MATERIALS & COMPONENTS
DECK
- 7 Ply Sustainable Canadian Maple
- Wood material comes from sustainable sources of supply
- Wood by-product is reclaimed for use in other products
TRUCKS
- Carver CX / C2.4 6.5"
WHEELS
- Arbor Easyrider Series - Cannon
- Sharp Lipped wheels for driving down the line
- Intended for slashing urban barrels
- Size: 65.0mm // Durometer: 78A
- Contact Patch: 51.0mm // Offset: 3.5mm
- Momentum Core: Dampens bumpy rides
- Venice Formula: Soft and grippy
OTHER COMPONENTS
- ABEC 7 Bearings with Spacers
- 3/16" Carver Padded Risers
- Griptape
-
MATERIALS & COMPONENTS
DECK
- 7 Ply Sustainable Canadian Maple
- Wood material comes from sustainable sources of supply
- Wood by-product is reclaimed for use in other products
TRUCKS
- Carver C7 / C2.4 6.5"
WHEELS
- Arbor Easyrider Series - Cannon
- Sharp Lipped wheels for driving down the line
- Intended for slashing urban barrels
- Size: 65.0mm // Durometer: 78A
- Contact Patch: 51.0mm // Offset: 3.5mm
- Momentum Core: Dampens bumpy rides
- Venice Formula: Soft and grippy
OTHER COMPONENTS
- ABEC 7 Bearings with Spacers
- 3/16" Carver Padded Risers
- Recycled Glass Re-Grit
-
C7 Trucks This is the signature truck that started it all. Still the smoothest turning, fastest pumping surf truck ever, it's at the leading edge of true surfskate performance. The patented second axis of this front truck not only increases the turning radius of your carve, but lets you snap the nose and pivot your turns off the tail. This dynamic creates thrust and drives you forward with increasing speed. The striking similarity to surfing performance has made the C7 the choice for surf training by Pros and Ams alike. -
C7 Trucks This is the signature truck that started it all. Still the smoothest turning, fastest pumping surf truck ever, it's at the leading edge of true surfskate performance. The patented second axis of this front truck not only increases the turning radius of your carve, but lets you snap the nose and pivot your turns off the tail. This dynamic creates thrust and drives you forward with increasing speed. The striking similarity to surfing performance has made the C7 the choice for surf training by Pros and Ams alike. -
C7 Trucks This is the signature truck that started it all. Still the smoothest turning, fastest pumping surf truck ever, it's at the leading edge of true surfskate performance. The patented second axis of this front truck not only increases the turning radius of your carve, but lets you snap the nose and pivot your turns off the tail. This dynamic creates thrust and drives you forward with increasing speed. The striking similarity to surfing performance has made the C7 the choice for surf training by Pros and Ams alike. -
C7 Trucks This is the signature truck that started it all. Still the smoothest turning, fastest pumping surf truck ever, it's at the leading edge of true surfskate performance. The patented second axis of this front truck not only increases the turning radius of your carve, but lets you snap the nose and pivot your turns off the tail. This dynamic creates thrust and drives you forward with increasing speed. The striking similarity to surfing performance has made the C7 the choice for surf training by Pros and Ams alike. -
CX TRUCKSThis is Carver’s hybrid surf and skate truck. On the one hand it’s a lightweight standard RKP (Reverse King Pin) hanger and base, on the other it has a patented geometry that squeezes every bit of turn and pump from the system. This means that you can pump this truck like a C7, but it lands airs and rides fakie with more stability as well. This opens up aerial maneuvers, and keys in with the latest progression of airs in surfing. -
CX TRUCKSThis is Carver’s hybrid surf and skate truck. On the one hand it’s a lightweight standard RKP (Reverse King Pin) hanger and base, on the other it has a patented geometry that squeezes every bit of turn and pump from the system. This means that you can pump this truck like a C7, but it lands airs and rides fakie with more stability as well. This opens up aerial maneuvers, and keys in with the latest progression of airs in surfing. -
CX TRUCKSThis is Carver’s hybrid surf and skate truck. On the one hand it’s a lightweight standard RKP (Reverse King Pin) hanger and base, on the other it has a patented geometry that squeezes every bit of turn and pump from the system. This means that you can pump this truck like a C7, but it lands airs and rides fakie with more stability as well. This opens up aerial maneuvers, and keys in with the latest progression of airs in surfing. -
CX TRUCKSThis is Carver’s hybrid surf and skate truck. On the one hand it’s a lightweight standard RKP (Reverse King Pin) hanger and base, on the other it has a patented geometry that squeezes every bit of turn and pump from the system. This means that you can pump this truck like a C7, but it lands airs and rides fakie with more stability as well. This opens up aerial maneuvers, and keys in with the latest progression of airs in surfing. -
LENGTH 29.5” / 74.9 cm WIDTH Front: 8.2’’ / 20.8 cm Back: 8.4’’ / 21.3 cm WHEELBASE 16" – 20" / 40.6 – 50.8cm CONCAVE 0.25 – 0.4’’ / 7 – 10 mm MATERIAL SFI-certified Canadian maple, Carbon fiber, Glass fiber, Embossed ABS topsheet -
Specs
Length: 76.2 cm / 30”
Width: 24.6 cm / 9.7”
Construction: Maple
Griptape Included: No.
No concave -
Dimensions
- Length - 28"
- Width: 6''
- Wheelbase: 20"
-
Dimensions
- Length - 25"
- Width: 6''
- Wheelbase: 17 3/4"
-
Dimensions
- Length - 25"
- Width: 6''
- Wheelbase: 17 3/4"
-
Dimensions
- Length - 28"
- Width: 6''
- Wheelbase: 20"
-
Dimensions
- Width: 10.5"
- Length: 31"
- Made in USA
-
Dimensions
- Width: 10.5"
- Length: 31"
- Made in USA
-
Sold as a pack of 2 rails with screws-ready to apply to your deck.
-
Sold as a pack of 2 rails with screws-ready to apply to your deck.
-
Sold as a pack of 2 rails with screws-ready to apply to your deck.
-
Relive the glory days of skateboarding with the Vision MG Old School Skateboard Deck! Comes with a classic old school shape and has a Width of 10” and a Length of 30”.
Specs
Length: 76.2 cm / 30”
Width: 25.4 cm / 10”
NOTE: grip tape not included and must be ordered separately.
-
Relive the glory days of skateboarding with the Vision MG Old School Skateboard Deck! Comes with a classic old school shape and has a Width of 10” and a Length of 30”.
Specs
Length: 76.2 cm / 30”
Width: 25.4 cm / 10”
NOTE: grip tape not included and must be ordered separately.
-
Relive the glory days of skateboarding with the Vision MG Old School Skateboard Deck! Comes with a classic old school shape and has a Width of 10” and a Length of 30”.
Specs
Length: 76.2 cm / 30”
Width: 25.4 cm / 10”
NOTE: grip tape not included and must be ordered separately.
-
The 2023 version is slightly stiffer and features a more durable and responsive construction. With the additional, shorter wheelbase option at the front, you can stand closer to the front truck. This gives you even more control at speed.
Specs
Length: 77.5cm / 30.5"
Width: 22.2cm / 8.75"
Wheelbase:51.4cm / 20.25" - 51.4cm / 23"Construction: SFI-certified Canadian Maple -
Dimensions
LENGTH
38" / 96.5 cm
WIDTH
9.4" / 24 cm
WHEELBASE
22.25" – 23.6" / 56.5 – 60 cm
CONCAVE
Elliptical / 0.47’’ / 12 mm
MICRO DROP
0.3’’ / 8 mm
MATERIAL
SFI-certified Canadian maple, Carbon fiber, Glass fiber, Embossed ABS topsheet
-
Out of stockOut of stock
Dimensions
- Length - 29”
- Width: 7.5”
- Wheelbase: 15 1/2”'
-
Dimensions
- Length - 29”
- Width: 7.5”
- Wheelbase: 15 1/2”'
-
Dimensions
- Length - 29”
- Width: 7.5”
- Wheelbase: 15 1/2”'
-
LENGTH 30” / 76.2 cm WIDTH 8.5’’ / 21.6 cm WHEELBASE 18.8" – 21.6" / 47.7 – 54.9 cm CONCAVE Elliptical / 0.4’’ / 10 mm MATERIAL SFI-certified Canadian maple, Carbon fiber, Glass fiber, Embossed ABS topsheet -
Doug personally Hand Signed each deck on the Tail!
Length: 78.7cm / 31"
Width: 26.7cm / 10.5" -
DECK
- 7 Ply Sustainable Canadian Maple
- Wood material comes from sustainable sources of supply
- Wood by-product is reclaimed for use in other products
TRUCKS
- Carver C7 / C2.4 6.5"
WHEELS
- Arbor Easyrider Series - Cannon
- Sharp Lipped wheels for driving down the line
- Intended for slashing urban barrels
- Size: 65.0mm // Durometer: 78A
- Contact Patch: 51.0mm // Offset: 3.5mm
- Momentum Core: Dampens bumpy rides
- Venice Formula: Soft and grippy
OTHER COMPONENTS
- ABEC 7 Bearings with Spacers
- 3/16" Carver Padded Risers (Double)
- Recycled Glass Re-Grit
-
Out of stockOut of stock
Dimensions
- Width: 10.25"
- Length: 31.25"
- Made in USA
-
Relive the glory days of skateboarding with the Vision MG Old School Skateboard Deck! Comes with a classic old school shape and has a Width of 10” and a Length of 30”.
Specs
Length: 76.2 cm / 30”
Width: 25.4 cm / 10”
NOTE: grip tape not included and must be ordered separately.
-
Specs
Length: 76.2 cm / 30"
Width: 25.4 cm / 10"
Construction: 7-ply Hard Rock Maple.
Gripped: No.
NOTE: grip tape not included and must be ordered separately.
-
Specs
Length: 76.2 cm / 30"
Width: 25.4 cm / 10"
Construction: 7-ply Hard Rock Maple.
Gripped: No.
NOTE: grip tape not included and must be ordered separately.
-
Out of stockOut of stock
Heroin DMODW Skeletal Skateboard Deck Features:
- DMODW White Skeletal Deck
- 9.25'' x31.8''
- 14.5''/15'' WB
- 7-Ply Canadian Maple
- Pro Model Deck
- Custom Shape
- This Deck comes with FREE grip. We will only install grip if you tell us. Send us a message via PM at check out.
-
Out of stockOut of stock
Heroin Skateboards Lee Yankou Croc Skateboard Deck Features:
- Giallo Deck
- 8.25'' x 31.75''
- 14.625" Wheelbase
- 7-Ply Canadian Maple
- Lee Yankou Pro Model
- This Deck comes with FREE grip. We will only install grip if you tell us. Send us a message via PM at check out.
-
Out of stockOut of stock
Death Richie Jackson Smoke & Mirrors Deck Features:
- Death Richie Jackson Smoke & Mirrors Deck
- Script Deck
- 8''
- 14.25'' WB
- 7-Ply Canadian Maple
- Team Model Deck
-
Death Radden Skull Girls Skateboard Deck Features:
- Death Script (White/Red) Skateboard Deck Features:
- Script Deck
- 8.375''
- 14.25'' WB
- 7-Ply Canadian Maple
- Team Model Deck
-
Death Radden Skull Girls Skateboard Deck Features:
- Death Script (White/Red) Skateboard Deck Features:
- Script Deck
- 8.10''
- 14.25'' WB
- 7-Ply Canadian Maple
- Team Model Deck
-
Death Radden Skull Girls Skateboard Deck Features:
- Skull Girls Deck
- 8.375''
- 14.25'' WB
- 7-Ply Canadian Maple
- Mark Radden Pro Model Deck
-
Out of stockOut of stock
Dimensions
- Length - 28 1/2”
- Width: 7 3/8”
- Wheelbase: 15 1/2”'
-
The Rocket Macro is the bigger of the two Ian Freire Pro models, this 36" is lightweight and a true Freeride machine. -
Dimensions
- Length: 80 cm / 31.5"
- Width: 23.6 cm / 9.2”
- Wheelbase: 53cm / 64 cm / 20.8" / 23.8”
- Construction: SFI-certified Canadian maple, Carbon fiber, Embossed ABS topsheet
- Griptape Included: No.
-
Features:
- One (1) Newton's Shred Goku Men's Short Sleeve T-Shirt
- Size: Small
- Color: Black
- 100% Guaranteed Authentic
-
Dimensions
Length: 97.5 cm / 38.4"
Width: 24.6 cm / 9.7"
Wheelbase: 74.5 / 29.3"
Main Use: Long Distance Pumping / Pushing
Mounting of trucks: Dropthrough
Kicks: No
Drop in deck: Medium drop
Flex: Flex or stiff,
Flex1: <110kg / 240lbs
Flex2: <90kg / 200lbs
Concave: 0.55” / 12 mm
Wedge: +9° front, -13° back
Weight: 1500 g / 3.3 lbs (flex) and 1700 g / 3.7 lbs (stiff)
- SFI certified bamboo (hollow core), SFI certified canadian maple, Carbon fiber, Glass fiber, Embossed ABS top-sheet
-
Out of stockOut of stock
Dimensions
- Length: 38.4” / 97.5 cm
- Width: 9.7” / 24.6 cm
- WHEELBASE: 29.3” / 74.5 cm
- CONCAVE: 0.55” / 12 mm
- WEDGE: 9° front, -13° back
- WEIGHT1500 g / 3.3 lbs (flex)1700 g / 3.7 lbs (stiff)MATERIAL SFI certified bamboo (hollow core), SFI certified canadian maple, Carbon fiber, Glass fiber, Embossed ABS top-sheet
-
Dimensions
- Length: 80.6 cm / 31.75”
- Width: 22.2 cm / 8.75”
- Construction: 7-Ply Hard Rock Maple.
- Gripped: No.
-
Dimensions
- Length: 80.6 cm / 31.75”
- Width: 22.2 cm / 8.75”
- Construction: 7-Ply Hard Rock Maple.
- Gripped: No.
-
Dimensions
- Length: 80.6 cm / 31.75”
- Width: 22.2 cm / 8.75”
- Construction: 7-Ply Hard Rock Maple.
- Gripped: No.
-
Dimensions
- Length: 80.6 cm / 31.75”
- Width: 22.2 cm / 8.75”
- Construction: 7-Ply Hard Rock Maple.
- Gripped: No.
-
Dimensions
- Length: 80.6 cm / 31.75”
- Width: 22.2 cm / 8.75”
- Construction: 7-Ply Hard Rock Maple.
- Gripped: No.
-
Dimensions
- Width: 10"
- Length: 30.25"
- Construction: 7-ply Hard Rock Maple.
- Made in USA
-
Out of stockOut of stock
Features:
- One (1) set of two (2) Bennett Vector 4.3 Trucks 110mm Skateboard Reverse Kingpin Trucks
- Axle width: 4.3"
- Hanger width: 110mm
- Constructed from high-quality materials
-
Out of stockOut of stock
Features:
- One (1) set of two (2) Bennett Vector 5.0 Trucks 127mm Skateboard Reverse Kingpin Trucks
- Axle width: 5"
- Hanger width: 127mm
- Constructed from high-quality materials
-
Features:
- One (1) set of two (2) Bennett Vector 5.0 Trucks 127mm Skateboard Reverse Kingpin Trucks
- Axle width: 5"
- Hanger width: 127mm
- Constructed from high-quality materials
-
Features:
- One (1) Newton's Shred Goku Men's Short Sleeve T-Shirt
- Size: Medium
- Color: Black
- 100% Guaranteed Authentic
